do not scale from this print ffsdx-xx-x-xx.xx-01-x-x-xxx no of positions -02 thru -25 (per row) lead style end assembly -s: single end -d: double end assembly length (2.00[50.8] minimum) option -rw: reverse wiring (not available with -rn1 or -rn2) -d"xx": daisy chain (minimum 2.00[50.8], 1.00[25.4] increments) -r: reversed -rn1: reverse polarization notch (not available with -rw or -rn2) -rn2: reverse polarization notch (not available with -rw or -rn1) -m: middle reverse -o: outside reverse -sr: strain relief (not available with -o, -m, -r, or -dxx) (sold as assemblies only) fig. 11 (ffsd-10-x-xx.xx-01-x-n-rw shown) - leave blank for standard, use c-67-l -s: use c-67-s -f: use c-67-f plating options standard polarization notch -n: polarization notch (not available in -02 thru -04) (leave blank for -02, -03, -04) shielded option -s: shielded (see note 7) (leave blank for non-shielded) * *not released for production c3 (see note 8) xx.xx[xx.x x 25.4] .13[3.2] fig. 2 (ffsd-10-s-xx.xx-01-x-n shown) (same as fig. 1, different as shown) notch denotes first position colored wire to side of first pos. indicator colored wire may be black, blue, or red. * (no of pos x .050[1.27]) + .165[4.19] ref (see note 8) xx.xx[xx.x x 25.4] .13[3.2] .120 3.05 ref .075 ref 1.91 c1 c5 c4 fig. 1 (ffsd-10-d-xx.xx-01-x-n shown) ab .010 max 0.25 cable overhang (see note 8) .200 - .003 + .006 5.08 - 0.08 + 0.15 .040 1.02 ref .006 max 0.15 -rn1 option -rn2 option -n option 1 2 c2 -n option colored wire to opposite side of first pos. indicator c ab ab ab sheet of unless otherwise specified, dimensions are in inches. tolerances are: decimals angles .xx: .01 [.3] 2 .xxx: .005 [.13] .xxxx: .0020 [.051] material: .050 x .050 double row female idc assembly by: dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing t newton 02/15/2008 4 1 sheet scale: 2:1 insulators: pbt, color: black contact: becu cable: tinned copper, color: gray plating: .000010 gold over .000050 nickel remainder: .000200 ref tin over .000050 nickel f:\dwg\misc\mktg\ffsdx-xx-x-xx.xx-01-x-x-xxx-mkt.slddrw notes: 1. hidden lines are used to show polarization when using -n option. 2. represents a critical dimension. 3. ffsd cable assemblies are lead free. 4. all assemblies to be 100% electrically tested for shorts and opens. 5. all assemblies to be 100% hi-pot tested at 630v. 6. strain relief to withstand 5lb[22n] straight pull. 7. all shielded cables have a ground wire on the first and last position. 8. when cutting cable to length, conductors may not extend past the cable insulation. ffsdx-xx-x-xx.xx-01-x-x-xxx 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322 revision ab
first position indicator first position indicator first connector second connector first position indicator first connector second connector first position indicator first position indicator first position indicator (min 2") xx.xx[xx.x x 25.4] .13[3.2] outside connector reversed when daisy chained (min 2") xx.xx[xx.x x 25.4] .13[3.2] middle connector reversed when daisy chained (min 2") xx.xx[xx.x x 25.4] .13[3.2] (min 2") xx.xx[xx.x x 25.4] .13[3.2] both connectors reversed when daisy chained fig, 4 (ffsd-10-d-xx.xx-01-x-n-dxx-o shown) (same as fig. 1, different as shown) (2.00[50.8] minimum, 1.00[25.4] increments) fig. 5 (ffsd-10-d-xx.xx-01-x-n-dxx-m shown) (same as fig. 1, different as shown) (2.00[50.8] minimum, 1.00[25.4] increments) fig. 6 (ffsd-10-d-xx.xx-01-x-n-dxx-r shown) (same as fig. 1, different as shown) (not available with -rn1 or -rn2 option) (2.00[50.8] minimum, 1.00[25.4] increments) fig. 7 (ffsd-10-d-xx.xx-01-x-n-dxx shown) (same as fig. 1, different as shown) (2.00[50.8] minimum, 1.00[25.4] increments) note: -rn1 = reverse notch on 1st connector only ( not available with -r option) -rn2 = reverse notch on 2nd connector only (not available with -r option) (reverse notch not available with -rw or any daisy chain options) fig. 3 (ffsd-10-d-xx.xx-01-x-n-rn1 shown) (same as fig. 1, different as shown) (ffsd-10-d-xx.xx-01-x-n-rn2 shown) (same as fig. 1, different as shown) sheet of .050 x .050 double row female idc assembly by: ffsdx-xx-x-xx.xx-01-x-x-xxx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing t newton 02/15/2008 4 2 sheet scale: 2:1 revision ab f:\dwg\misc\mktg\ffsdx-xx-x-xx.xx-01-x-x-xxx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322
(no. of pos. x .050[1.27]) + .315[8.00] ref .335 .010 8.51 0.25 .039 1.00 (xx.xx[xx.xx x 25.4] .13[3.2] fig. 9 strain relief option (pos 2-15 only) (ffsd-10-d-xx.xx-01-x-n-sr shown) (same as fig. 1, different as shown) 3 4 in-process 1 (2-15 pos -sr only) in-process 2 (2-15 pos -sr only) c1 c6 in-process 1 (16-25 pos -sr only) in-process 2 (16-25 pos -sr only) xx.xx[xx.x x 25.4] + .4375[11.113] .125[3.18] (xx.xx[xx.xx x 25.4] .13[3.2] xx.xx[xx.xx x 25.4] .13[3.2] .039 1.00 5 6 no. of pos. x .050[1.27] + .315[8.00] ref 'a' .0184 - .000 + .002 0.47 0.000 + 0.051 detail 'a' scale 8 : 1 in-process 3 (16-25 pos -sr only) xx.xx[xx.xx x 25.4] .13[3.2] xx.xx[xx.xx x 25.4] +.4375[11.113] .125[3.18] c1 c1 fig. 10 strain relief option (pos 16-25 only) (ffsd-25-d-xx.xx-01-x-n-sr shown) (same as fig. 2, different as shown) c6 c1 scale 1 : 1 sheet of .050 x .050 double row female idc assembly by: ffsdx-xx-x-xx.xx-01-x-x-xxx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing t newton 02/15/2008 4 3 sheet scale: 2:1 revision ab f:\dwg\misc\mktg\ffsdx-xx-x-xx.xx-01-x-x-xxx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322
fig. 12 (ffsds-10-d-xx.xx-01-x-n shown) (same as fig. 1, different as shown) *not released for production 8 first and last positions ground 9 7 position 1 indicator sheet of .050 x .050 double row female idc assembly by: ffsdx-xx-x-xx.xx-01-x-x-xxx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing t newton 02/15/2008 4 4 sheet scale: 2:1 revision ab f:\dwg\misc\mktg\ffsdx-xx-x-xx.xx-01-x-x-xxx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322
|
